Social Icons

Pages

Battery Voltage monitor

Battery Voltage monitorAll rechargeable battery has their specific level of charging and discharging, they are likely to get damage if the battery voltage exceeds that level. Here is a simple circuit battery voltage monitor used to indicate the state of battery by monitor them.

The circuit of battery voltage monitor is fabricated and designed around an op-amp IC LM709 configured as comparator. Where bi-color LED is used as indicator and indicates three voltage level state of a 12V battery. Resistor R1 with potentiometer VR1 is used as potential driver of voltage monitor circuit.When voltage level rise above 13.5 volts, the output from IC1 goes low as a result LED begins to emit RED light. Similarly, when the voltage fall below a preset level (10Volts) the output goes high and the LED start to emit GREEN light. Resistors R3 and R4 is used as current limiter of LED.


PARTS LIST

Resistors

R1 = 1 KΩ
R2 = 18 KΩ 

R3, R4 = 680 Ω 
VR1 = 10 KΩ (Potentiometer) 

Semiconductors

IC1 = LM709 
D1 = 1N4003 

Miscellaneous

B1 = 12V Battery 
LED = Bi-color LED



No comments:

Post a Comment

 
Blogger Templates